Boost your gaming aesthetic with theCiT Raider Black ARGB PC Case. Featuring six ARGB Inner-Ring Infinityfans as well as providing ample support for all your high-end hardware.Take your setup to new levels with a stylish and elegant dual 4mmtempered glass panelling with a 70% front tint and 30% side tint thiscase looks a prospect. Surrounded from every angle with stylish andsleek fans, customisable RGB lighting and effortless cable management.Within the interior of the Raider includes cable routing holes on theMotherboard backplate that makes managing your cables nice and easy andkeeps your PC looking clean.
Install another two fans to fully populate the Raider and make it eightfans and with up to three water cooling locations, this case is full ofcooling capability.
Stand out with the touch of Infinity, the circular-shaped infinitymirrors at the centre of the fans create a mesmerising LED lightingdisplay with their multi-layer effect. They not only look fantastic butalso ensure all components are taken care of for when it comes tokeeping temperatures balanced & conditions optimised for a peakperformance.
Moving onto the top of the case the I/O panel provides variedconnectivity support with USB3.0 and USB2.0 connections and inside theRaider we have included a 6-port magnetic ARGB fan hub with controlsfor your LED lighting and have access to approximately 25 LED modes orhave access to 16.8 million colours using a compatible addressable RGBMotherboard.
This completely black interior has smart build potential with aspacious interior offering wide support for a range of gaming hardwareto build a powerful effective gaming PC. It can fit a graphics card upto 35 centimetres in length, CPU Cooler up to 16 centimetres in heightand can hold 2 x 2,5" and 2 x 3,5" drives. An ATX power supply unitmeasuring up to 200mm will fit inside.
Build a striking gaming chassis with ease and create gaming PC withreal purpose and intent using the Raider.
Key Features- Classy Raider - The CiT Raider is built using a combination ofpremium materials, the chassis is 0.5mm SPCC steel and the front andleft-hand side panelling is made with stylish 4mm tempered glass and a70% / 30% tint to showcase your ARGB fans and key components. Thetempered glass is surrounded by black interior for that classic look.
- High-End Cooling - There are six pre-installed Inner-RingInfinity fans on the CiT Raider. There are three 120mm fans mountedonto the front panel, whilst there are two 120mm fans are mounted onthe top and a single fan on the rear panel. These fans can becontrolled one of two ways either via the integrated LED button on theI/O panel or by connecting the 5V 3pin connector from the hub to yourMotherboard.
- Six Infinity 120mm ARGB Inner-Ring Black Fans - This version ofthe CiT Raider comes with 6 x Infinity 120mm ARGB Inner-Ring BlackFans. The Inner-Ring and the circular-shaped, multi-layer InfinityMirror Design, the Infinity fans add a mesmerising LED lighting displayto the Raider.
- Tempered Glass Panel - The solid 4mm tempered glass panels with70% tinted glass on the front and a 30% tinted glass on the side adds apremium finish and reduces glare and offers an obstructed view of theinterior, components and ARGB.
- Motherboard Software - The ARGB lighting effects can be syncedthrough the Motherboard which supports ARGB function, 5V 3-PinAddressable RGB header, including ASUS AURA, MSI Mystic Light, GigabyteFusion 2.0 & ASRock. Customise the look with endless possibilitieswith 16.7 million static modes and 12 pre-set lighting effects.
- VDG Connector Included - A 3pin VDG connector is included whichis intended for use with older Gigabyte and Aorus Motherboards.
- Fan Controller Included - A 6-port magnetic hub is includedinside the Raider, designed with a magnet it can easily fit inside yourcase. Add up to 6 case fans and is powered directly from your powersupply via SATA. You can access it using the LED button and can beconnected to your Motherboard using a single cable - you can setupwithout any additional cables.
- Available In Two Colours - The CiT Raider is available in twocolours, black or white. The model of the Raider is the black, theperfect backdrop for high-end hardware and RGB lighting.
- PSU Shroud - To keep the interior looking neat and tidy theRaider has a dedicated PSU Shroud that is made with solid steelpanelling that perfectly covers the cables, showcases the PSU specs andcontains a hard drive mount. The PSU shroud can mount two 3.5” harddrives. There are another two hard drive slots available at the back ofthe Motherboard plate so in total there is 2 x 2.5” and 2 x 3.5” thatcan be mounted to this chassis.
- ATX Housing - Standing at 450mm high, 192mm wide and 405mm deepthe Raider is compatible with a wide range of components, with 350mm ofclearance for GPUs and it can facilitate CPU coolers up to 160mm tall.There are seven expansion slots on the rear panel for PCIe devices.
- I/O Panel - Providing you with a varied connectivity support, theRaider has a fully equipped I/O panel featuring one USB 3.0, two USB2.0 and HD Audio, as well as a LED Button (Reset Switch).
SpecificationsChassis Dimensions (Excluding Fascia / Panels): (W) 192 x (H) 435 x (D)375mm
Water Cooling Support:
Front Supported Radiator(s): 120mm and 240mm
Top Supported Radiator(s): 120mm and 240mm
Rear Supported Radiator(s): 120mm
Cooling Fan: Fan Powered Via: 3pin Fan Connector
Fan LEDs Powered Via: 3pin AURA
Fan Controller Support: Fan Controller Included: Yes
Fan Controller Power Via: SATA Connector
LED Controller: Yes
Fan Power Connector: 3 or 4pin
LED Power Connector: 3pin AURA
Fan Control Via: LED Button (Reset Switch) or MB Sync
Supported Qty of Fans (Max.): 6
Supported Qty of LEDs (Max.): 6
Additional Chassis Specifications: PSU Max. Length: 200mm
Packaging Type: EPE Foam
Packaging Thickness: 19.23mm
Case Specifications- Form Factor: Midi Tower
- Motherboard Support: ATX, Micro ATX, Mini ITX
- PSU Support: Standard ATX
- PSU Location: Bottom
- Gaming Case: Yes
- Water Cooling: Water Cooling Ready!
- Supported Radiator Size: 240mm
- Supported Radiator Positions: Front, Top
- Body Material: SPCC0.5mm
- Front Bezel Material: ABS & 4mm Tempered Glass With 70Percent Tint
- Side Panel: 4mm Tempered Glass With 30 Percent Tint
- Internal Cable Management Depth: 15mm
- External Bays:
- Internal Bays: 2 x 3.5” Internal
- 2 x 2.5” Internal
- Drive Bay Notes:
- Expansion Slots: 7 x Full Size
- Cooling Front: Space For 3 x 120mm Fans (3 x 120mm ARGB InfinityInner-Ring Fans Included)
- Cooling Top: Space For 2 x 120mm Fans (2 x 120mm ARGB InfinityInner-Ring Fans Included)
- Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm ARGB InfinityInner-Ring Fan Included)
- Cooling Side: None
- Cooling Bottom: Space For 2 x 120mm Fans
- Fan Controllers: 1 Fan Controllers, controlling up to
- 6 fans in total
- IO Ports: 1 x USB 3.0
- 2 x USB 2.0
- 1 x HD Audio
- 1 x Microphone
- GPU Max Length: 350mm
- CPU Cooler Maximum Height: 160mm
- Front Bezel Colour: Black / Glass
- Body Colour: Black
- System Cabinet Features:
- PSU Included: No
