The CiT Raider is a Mid Tower professional gaming case with a 4mmtempered glass front panel and a full tempered glass left side panel,allowing you to see the light from your Spectrum fans. The Raider comeswith a simple and easy to build design and a popular gaming internalstructure. You can fit a total of eight fans but it comes with 4 x120mm Dual-Ring Halo Spectrum LED fans, three at the front and one atthe back.
The Raider case comes with a PCB hub that can fit up to 10 devices. 8fans and 2 LED strips. An RF controller is included. The RF controllermeans you can use anywhere and lights the fans 6 single colours (Red,Green, Blue, Cyan, Purple and Yellow) and comes with several differentlighting modes so you never run out of ideas. As well has being able tocontrol the lighting, if you choose to have single colour lighting youcan control the brightness through the speed buttons on the RF remotebut if you choose the Spectrum lighting effect you can control the fanspeed through the speed buttons on the RF remote.
A 4pin Molex connector and a 3pin Asus connector come with the RGB hubmeaning you can control your LED light through your motherboard orother supported devices As well as the RF controller. Giving you morecontrol!
You can enhance your cooling further with room at the front for aradiator up to a 360mm radiator, at the top a radiator up to 280mm andat the back a radiator up to 120mm. This gaming case has goodcompatibility, it supports ATX, Micro ATX, Mini ITX and supports ATXpower supply up to 240mm in length to give you unlimited options. Onthe top of the case for easy access is 1 x USB3.0, 2 x USB2.0 and HDaudio allowing you to connect to a variety of devices.
Key Features - Stylish Exterior - 4mm thick tempered glass front panel anda full tempered glass left side panel not only gives the Raider aprofessional look but allows you to show off the lighting coming fromyour Spectrum fans.
- Fans - Supports up to eight fans with four Dual-Ring HaloSpectrum fans included to give your case some added colour in yourfinished build.
- Water-Cooling Support - As well as supporting eight fansthe Raider supports a radiator up to 240mm at the front, at the top aradiator up to 240mm and at the back a 120mm radiator to give youextensive cooling support.
- PCB Hub - A PCB hub is included and can fit up to 10devices, 8 fans and 2 LED strips. The PCB hub comes with a 4pin Molexfor easy connectivity and a 3pin ASUS connector is also includedconnecting to your motherboard so you have the choice of how you wantto control your LED's.
- RF Controller - The RF remote controller included gives youthe option of six single colours and several different lighting modesso you can stand out from the crowd. With the remote controller beingRF it makes it easier and more efficient when you come to change yourLED lighting..
- I\O Ports - Easy accessible 1 x USB2.0, 2 x USB 3.0 portson the top with transfer speeds of 5Gbps means you can connect to arange of media devices.
- Removable Dust Filters - A dust filter on the top andbottom of the Raider helps to prevent dust from getting into your buildand helps improve the performance of your chassis.
Specifications | Chassis Dimensions (Excluding Fascia / Panels): | (D) 374 x (W) 187 x (H) 436mm |
| PSU Shroud : | Space For 2 x 120mm Fans |
CaseSpecifications | Form Factor: | Midi Tower |
| Motherboard Support: | ATX, Micro ATX, Mini ITX |
| PSU Support: | Standard ATX |
| PSU Location: | Bottom |
| Gaming Case: | Yes |
| Water Cooling: | Water Cooling Ready!
Supported Radiator Size: 240mm
Supported Radiator Positions: Front, Top |
| Body Material: | 0.5mm SPCC |
| Front Bezel Material: | 4mm Tempered Glass |
| Side Panel: | Tempered Glass |
| Internal Cable Management Depth: | 15mm |
| External Bays: | |
| Internal Bays: | 2 x 3.5” Internal
2 x 2.5” Internal
|
| Drive Bay Notes: | |
| Expansion Slots: | 7 x Full Size
|
| Cooling Front: | Space For 3 x 120mm or 2 x 140mm Fans (3 x 120mmHalo Dual-Ring Spectrum Fans inc.) |
| Cooling Top: | Space For 2 x 120mm or 2 x 140mm Fans |
| Cooling Rear: | Space For 1 x 120mm Fan (1 x 120mm HaloDual-Ring Spectrum Fan inc.) |
| Cooling Side: | None |
| Cooling Bottom: | Filtered Vent For PSU |
| IO Ports: | 1 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
|
| GPU Max Length: | 350mm |
| CPU Cooler Maximum Height: | 160mm |
| Front Bezel Colour: | Black |
| Body Colour: | Black |
| System Cabinet Features: | |
| PSU Included: | No |
