Enhance your gaming decor with the CiT Blade ARGB PC Case. Featuringsix ARGB Inner-Ring fans as well as providing ample support for allyour high-end hardware.
Take your setup to new levels with this distinctive and customisableATX gaming chassis with a stylish and elegant dual tempered glasspanelling with a 70% tint joined by dedicated front ventilationchannels combine to offer a stunning look and substantial airflow thiscase has the functionality and aesthetics to match.
Surrounded from every angle with smart ARGB fans, customisable RGBlighting and effortless cable management. Within the interior of theBlade includes cable routing holes on the Motherboard backplate thatmakes managing your cables nice and easy and keeps your PC lookingclean.
Moving onto the top of the case the I/O panel provides variedconnectivity support with USB3.0 and USB2.0 connections and inside theBlade we have included a 6-port magnetic ARGB fan hub with controls forprecise control of your LED lighting and have access to approximately25 LED modes or have access to 16.8 million colours using a compatibleaddressable RGB Motherboard.
This completely black interior has smart build potential with aspacious interior offering wide support for a range of gaming hardwareto build a powerful effective gaming PC. It can fit a graphics card upto 29 centimetres in length, CPU Cooler up to 15.5 centimetres inheight and can hold 2 x 2,5" and 2 x 3,5" drives (Please note only 1 x2.5" or 1 x 3.5" hard drive can be mounted in the stated locations). AnATX power supply unit measuring up to 150mm will fit inside.
Build a signature gaming case with ease and create a sharp gaming PCwith real style using the Blade.
Key Features- Elegant Blade - The CiT Blade is built using two tempered glasspanels perfect for showing off your system and lighting, with dedicatedfront ventilation channels for ample airflow and tempered glasspanelling with a stylish 70% tint to showcase your ARGB fans and keycomponents. The tempered glass is surrounded by black interior for thatclassic look.
- High-End Cooling - There are six pre-installed Inner-Ring ARGBfans on the CiT Blade. There are three 120mm fans mounted onto thefront panel, whilst there are two 120mm fans are mounted on the top anda single fan on the rear panel. These fans can be controlled one of twoways either via the integrated LED button on the I/O panel or byconnecting the 5V 3pin connector from the hub to your Motherboard.
- Fan Controller Included - A 6-port magnetic hub is includedinside the Blade, designed with a magnet it can easily fit inside yourcase. Add up to 6 case fans and is powered directly from your powersupply via SATA. You can access it using the LED button and can beconnected to your Motherboard using a single cable - you can setupwithout any additional cables.
- Motherboard Software - The ARGB lighting effects can be syncedthrough the Motherboard which supports ARGB function, 5V 3-PinAddressable RGB header, including ASUS AURA, MSI Mystic Light, GigabyteFusion 2.0 & ASRock. Customise the look with endless possibilitieswith 16.7 million static modes and 12 pre-set lighting effects.
- VDG Connector Included - A 3pin VDG connector is included whichis intended for use with older Gigabyte and Aorus motherboards.
- Tinted Tempered Glass Panels - The solid tempered glass panelswith 70% tinted glass adds a premium finish and reduces glare andoffers an obstructed view of the interior, components and ARGB.
- Available In Two Colours - The CiT Blade is available in twocolours, black or white. The model of the Blade is the black, theperfect backdrop for high-end hardware and RGB lighting.
- PSU Shroud - To keep the interior looking neat and tidy the Bladehas a dedicated vented PSU Shroud that is made with solid steelpanelling that perfectly covers the cables, showcases the PSU specs andcontains a hard drive mount. The PSU shroud can mount a 2.5" or 3.5hard drive. There is another hard drive slot available on top of thePSU shroud so in total there is 2 x 2.5 and 2 x 3.5 that can bemounted to this chassis (Please note only 1 x 2.5" or 1 x 3.5" harddrive can be mounted in the stated locations).
- Vented Side Panel - The right-hand side panel made of metal isvented, natural airflow increases thanks to the additional ventilationthrough the circular cut-outs.
- ATX Housing - Standing at 447mm high, 194mm wide and 338mm deepthe Blade is compatible with a wide range of components, with 290mm ofclearance for GPUs and it can facilitate CPU coolers up to 155mm tall.There are seven expansion slots on the rear panel for PCIe devices.
- I/O Panel - Providing you with a varied connectivity support, theBlade has a fully equipped I/O panel featuring one USB 3.0, two USB 2.0and HD Audio, as well as a LED Button (Reset Switch).
SpecificationsChassis Dimensions (Excluding Fascia / Panels): (W) 192 x (H) 447 x (D)338mm
Water Cooling Support:
Front Supported Radiator(s): 120mm and 240mm
Top Supported Radiator(s): 120mm and 240mm
Rear Supported Radiator(s): 120mm
Cooling Fans:
Fan Powered Via: 3pin AURA
Fan Controller Support: 3pin Fan Connector
Fan Controller Support:
Fan Controller Included: Yes
Fan Controller Power Via: SATA Connector
LED Controller: Yes
Fan Power Connector: 3 or 4pin
LED Power Connector: 3pin AURA
Fan Control Via: LED Button (Reset Switch) or MB Sync
Supported Qty of LEDs (Max.): 6
Supported Qty of LEDs (Max.): 6
Additional Chassis Specifications:
PSU Max. Length: 150mm (3.5" drive installed) & 190mm (2.5" driveinstalled)
Case SpecificationsForm Factor: Midi Tower
Motherboard Support: ATX, Micro ATX, Mini ITX
PSU Support: Standard ATX
PSU Location: Bottom
Gaming Case: Yes
Water Cooling: Water Cooling Ready!
Supported Radiator Size: 240mm
Supported Radiator Positions: Front, Top
Body Material: 0.61mmSPCC
Front Bezel Material: ABS & Tempered Glass With 70 Percent Tint
Side Panel: Tempered Glass With 70 Percent Tint
Internal Cable Management Depth: 15mm
External Bays:
Internal Bays: 2 x 3.5 Internal
2 x 2.5 Internal
Drive Bay Notes: 2 x 2.5" bays share 3.5" bays
Expansion Slots: 7 x Full Size
Cooling Front: Space For 3 x 120mm Fans (3 x 120mm Inner-Ring ARGB FansIncluded)
Cooling Top: Space For 2 x 120mm Fans (2 x 120mm Inner-Ring ARGB FansIncluded)
Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm Inner-Ring ARGB FanIncluded)
Cooling Side: Vented
Cooling Bottom: Space For 2 x 120mm Fans
Fan Controllers: 1 Fan Controllers, controlling up to
6 fans in total
IO Ports: 1 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
GPU Max Length: 290mm
CPU Cooler Maximum Height: 155mm
Front Bezel Colour: Black / Glass
Body Colour: Black
System Cabinet Features:
PSU Included: No
