Stand out with the GameMax Infinity, a stunning all-in-white gaming case.Using our years of experience, every detail from the material to thethe design has been carefully thought about. The modular and dynamic designof the Infinity ensures you can pack plenty of options inside,providing the platform to create a powerful PC Gaming Rig.
Raising the standards, this stylish ATX is constructed using acombination of tempered glass and metal mesh panels. This case has manyfeatures that make it the perfect choice to showcase spectacularhigh-end hardware. Easy to build in, the Infinity can accommodate atotal of 10 fans and has huge water-cooling potential and that is notall, there is room for a 360mm graphics card and a CPU Cooler of 170mm.
We have now added 6 Dual-Ring ARGB fans, an ARGB fan controller and RFremote controller, which puts you in control of all your LED lightingeffects either manually or by syncing it with your Motherboard andcontrolling using the software.
The Infinity is modern, sleek and sturdy and primed to offer thecomplete performance.
Key FeaturesInfinity With 6 x Dual-Ring ARGB Fans- The GameMax Infinity is an excellent fit for gamers who loveARGB, included inside the box are 6 x Dual-Ring ARGB Fans, ARGB fancontroller with 10 ports (8 x 5 Pin Fans & 2 x 3 Pin LED Strips)and RF remote controller. With this software-free solution, you willhave your fans up and running in no time and control manually using theRF controller that comes with approximately 300 automatic colourmodes and 7 single colour modes to choose from. Please note the 6 xDual-Ring ARGB Fans and ARGB fan controller are included inside the boxonly and will need to be installed.
Motherboard Sync - Take yourcolour to new levels, you can connect the controller to yourMotherboard, connect the 3 Pin AURA to a 5V 3 Pin connection on acompatible motherboard and you can use the mobo software forsystem-wide lighting synchronization.
Full White Design - Wantsomething a little different then look at the GameMax Infinity, thestylish outer chassis, manufactured from a combination of metal, meshand tempered glass and finished in white. The interior is made usingthe same aesthetic as the exterior and helps highlight your internalcomponents and other ARGB hardware you want to install.
Dual Chamber Layout - Differentfrom traditional computer cases, the infinity is designed using a dualchamber layout which provides plenty of space for your hardware, goodairflow & ventilation, cable management and guarantees you cancreate a beautiful build. The dual chamber design allows you to situateyour power supply, hard drives and cables in the rear chamber freeingup the main chamber for your fan and radiator mounting points creatingan unrestricted view of your components that matter.
2 x Tempered Glass Panels -Designed with 4mm tempered glass front and side panels which are notonly sturdy and durable and are excellent on the eye. Both are cleartransparent windows perfect for showcasing your ARGB LED lighting andinternal component construction.
2 x Mesh Panels - The Infinityhas the aesthetics and it has the performance to match, the top andthe right side panel of the chassis is designed using a metal mesh which isin 1mm in diameter to deliver massive airflow potential.
Concentrated Airflow - Designedto improve airflow with the perfect all-round heat dissipation and roomto fit a max of 10 fans and supports a 360mm water cooler.
USB Type-C Port - Support USBType-C connection and have up to 10Gbps transfer speeds.
Removable Dust Filter - Aremovable dust filter included on the bottom of the Infinity helps toprevent dust from getting into your build and is easy to clean.
SpecificationsChassis Dimensions (Excluding Fascia / Panels): (W) 273 x (H) 399 x (D)422mm
Power Supply: PSU Location: Mid Rear
PSU max. Length (mm): 200mm
Water Cooling Support: Top Supported Radiator(s): 120mm, 240mm, 360mm
Rear Supported Radiator(s): 120mm
Other Supported Radiator(s): 120mm, 240mm, 280mm, 360mm (MainboardPlate Bottom)
Fan Controller Included: Yes
Fan Controller Power Via: SATA Connector
Fan Power Connector: 5 Pin Connector (ARGB Compatible)
LED Power Connector: 5 Pin Connector (ARGB Compatible)
Supported Qty of Fans (max.): 8
Supported Qty of LED (max.): 2 x 3 Pin LED Strips
Packaging Type: EPE Foam
Packaging Thickness: 22.83mm
Case Specifications- Form Factor: Midi Tower
- Motherboard Support: ATX, Micro ATX, Mini ITX
- PSU Support: Standard ATX
- PSU Location: None
- Gaming Case: Yes
- Water Cooling: Water Cooling Ready!
- Supported Radiator Size: 360mm
- Supported Radiator Positions: Top
- Body Material: 0.86mmSPCC
- Front Bezel Material: 4mm Tempered Glass & Metal
- Side Panel: 4mm Tempered Glass
- Internal Cable Management Depth: 89mm
- External Bays:
- Internal Bays: 3 x 3.5” Internal
- 5 x 2.5” Internal
- Drive Bay Notes: 2 x 3.5" & 3 x 2.5" or 1 x 3.5" or 5 x 2.5"
- Expansion Slots: 7 x Full Size
- Cooling Front: None
- Cooling Top: Space For 3 x 120mm Fans
- Cooling Rear: Space For 1 x 120mm or 1 x 140mm Fan
- Cooling Side: Space For 3 x 120mm or 2 x 140mm Fans
- Cooling Bottom: Space For 3 x 120mm or 2 x 140mm Fans
- Fan Controllers: 1 Fan Controllers, controlling up to
- 8 fans in total
- IO Ports: 1 x USB 3.1 Type C
- 1 x USB 3.0
- 1 x HD Audio
- 1 x Microphone
- GPU Max Length: 360mm
- CPU Cooler Maximum Height: 170mm
- Front Bezel Colour: White
- Body Colour: White
- System Cabinet Features:
- PSU Included: No
