Change the game with the GameMax Brufen C1 C0C Gaming Chassis. Uniquelydesigned and functionality never seen before sets itself apart. Thefirst COC gaming chassis born for Intel 10th generation CPU cooling,COC stands for Cooling & Over-Clocking, which means coolingoverclocking.
It is a new type of heat dissipation, a turbo fan has been added to themain board of the chassis to form a new T-type targeting air ductinside the PC system to help cool down various accessories in the PCsystem.
This COC technology has also obtained two invention patents and twostructural patents, which is a new technology developed by GameMaxafter gathering masses of data and research and development incombination with the demands of different consumer groups in manycountries around the world.
There are 3 x 120mm ARGB fans pre-installed on the front and 1 x 120mmARGB fan on the rear and the additional 1 x COC turbo fan onmotherboard plate. The ARGB LED lights and RGB modes can all becontrolled via the V2.0 PWM ARGB hub providing the perfect balancebetween style and RGB.
The Brufen C1 can support up to 8 fans and comes with a V2.00 ARGB hubsupporting a 3 Pin ARGB header to connect directly to your motherboard,allowing you to control your fans and LED strip via motherboardprovided software. Please note the ARGB hub can only fit 5 fans intotal.
In line with the GameMax ethos this case offers style, performance andthe ultimate experience.
Key FeaturesCooling & Overclocking System - TheBrufen C1 is a superb and unique Mid-Tower PC gaming case with room foran E-ATX motherboard, an all-black chassis featuring the first coolingand over clocking system providing incredible airflow throughout thechassis and with five built in fans and four of them are ARGB fans, theBrufen has the power and resources to constantly perform at the veryhighest level but aesthetically the Brufen looks the fantastic! (Pleasenote the front fans must be removed in order to fit the E-ATXMotherboard).
Function - Two impressivefunctions that we have included in the Brufen that other players in themarket have not, a T-shaped targeted air duct and a COC turbo fan bothact as an active overall temperature control solution (MB, VRM, PCH& CPU). Reduces the overall temperature inside of your computer toguarantee a steady operation of all your included hardware 100% of thetime.
Motherboard Sync - You can nowtake your colour control to new levels with the included Aura SyncCable, easily connect to the Aura Sync Switch on the PWM hub and simplyconnect the 3 Pin AURA to a 5V 3 Pin connection on a compatiblemotherboard and you can use the mobo software to sync your fans andstrips the way you like and have even more access to more LED colourmodes!
ARGB Hub - Included in theBrufen C1 is an ARGB V2.0 ARGB PWM hub, connect up to five fans and twoLED strips, have access to 18 colour modes manually or have even moreusing the motherboard software. Once all connected enjoy PWM auto speedcontrolled via MB’s PWM signal, also 2 RGB buttons (Mode &Brightness), it is much better for the user to easy adjust the LED'sand adjust between 5 different brightness modes (0-20-40-80-100%).
Redefining Airflow - Changingthe landscape the Brufen C1 is the ultimate chassis when it comes toairflow, with five pre-installed fans - 4 x 120mm ARGB fans and 1 x COCturbo fan situated on the motherboard plate. Never again should you beworrying about how you are going to keep your PC cool. We have youcovered.
Tempered Glass - Featuring a4mm tempered-glass side panel with a hinged door design, no screws arerequired, has been included to make it even easier when building.
Specifications- Chassis Dimensions (Excluding Fascia / Panels): (W) 210 x (H) 440x (D) 361mm
- Motherboard Form Factor: Please note only E-ATX motherboards canbe fitted if the front fans have been removed.
- Fan Controller Included: Yes
- Fan Controller Power Via: SATA Connector
- LED Controller: Yes
- Fan Power Connector: 3 Pin Fan Connector
- LED Power Connector: 3 Pin AURA
- Fan Control Via: 4 Pin PWM
- Supported Qty of Fans (max.): 5
- Supported Qty of LED (max.): 5 x 3 Pin AURA & 2 x LED Strips
- Water Cooling Support:
- Rear: 120mm
- Other Supported Radiators: 240mm (PSU Shroud)
- PSU max. Length (mm): 155mm
Case Specifications- Form Factor: Midi Tower
- Motherboard Support: ATX, Micro ATX, Extended ATX, Mini ITX
- PSU Support: Standard ATX
- PSU Location: Bottom
- Gaming Case: Yes
- Water Cooling: Water Cooling Ready!
- Supported Radiator Size: 360mm
- Supported Radiator Positions: Front, Top
- Body Material: 0.5mm SPCC
- Front Bezel Material: Mesh & ABS
- Side Panel: Tempered Glass
- Internal Cable Management Depth: 25mm
- External Bays:
- Internal Bays: 2 x 3.5” Internal
- 3 x 2.5” Internal
- Drive Bay Notes: 1 x 2.5" & 1 x 3.5" shared
- Expansion Slots: 7 x Full Size
- Cooling Front: Space For 3 x 120mm or 3 x 140mm Fans (3 x 120mmARGB Fans Included)
- Cooling Top: Space For 2 x 120mm or 2 x 140mm Fans
- Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm ARGB FanIncluded)
- Cooling Side: 1 x 140mm COC Turbo Fan Included
- Cooling Bottom: Space For 2 x 120mm Fans
- Fan Controllers: 1 Fan Controllers, controlling up to
- 5 fans in total
- IO Ports: 2 x USB 3.0
- 1 x USB 2.0
- 1 x HD Audio
- GPU Max Length: 355mm
- CPU Cooler Maximum Height: 160mm
- Front Bezel Colour: Black / Gun Metal Grey
- Body Colour: Black
- System Cabinet Features:
- PSU Included: No
