The Phantom from CiT is a stylish and high airflow Micro-ATX case.Featuring a full mesh front panel with a polygonal-shaped design togive the Phantom that extra punch! Featuring a full mesh front paneland three ARGB LED fans ensures maximum air intake with ventilation onthe top, bottom and rear enhances the airflow throughout the chassis.
Magnificent cooling support with Pre-installed ARGB LED intake &exhaust fans and space for another two fans, making it six fansavailable to install. Control manually thanks to the built-incontroller inside one of the front fans or ARGB Sync compatible.
The hinged tempered glass panel that is screwless has been designed togive you easy access to the interior and the interior is completelyblack, the enclosed PSU shroud contributes to a tidy look.
Spacious storage space available with five hard drive positions andthree radiator positions available with a 360mm maximum you can fit atthe front and Three USB ports located on the I/O finish this case offnicely.
Key FeaturesHigh Airflow, Stylish Front Panel - Thefront panel of the CiT Phantom is a stylish & unique one with apolygonal-shaped design and made entirely of mesh provides ampleairflow into your system for more efficient cooling and exquisite looks.
Cooling Support - Four factoryinstalled ARGB fans are pre-installed and with support for another twofans Top: Space For 2 x 120mm Fans. This Micro-ATX casing also can fita 360mm radiator at the front, a 240mm radiator at the top and a 120mmradiator in the rear of the case.
ARGB LED Fans - The four ARGBfans that are pre-installed are available with approximately 30 colourLED combinations, simply plug in the power and using the LED buttoneasily switch between the LED modes and enjoy the visual experience.
Motherboard Sync - Take yourcolour to new levels with the included Aura Sync Cable, easily connectthe 3 Pin AURA to a 5V 3 Pin connection on a compatible motherboard andyou can use the mobo software for system-wide lighting synchronization.
Tempered Glass Panel - CiT havemade the Phantom so easy to build in and featuring a solid temperedglass side panel with a hinged door design, screwless, making it eveneasy to build inside.
MATX Chassis - From Mini-ITXto Micro-ATX Motherboards are compatible, graphics cards up to 325mm inlength and CPU Cooler up to 165mm in height can fit into the Micro-ATXhousing, making this the perfect case for enthusiasts.
Specifications- Chassis Dimensions (Excluding Fascia / Panels): (W) 201 x (H) 410 x (D) 330mm
- Fan Controller Included: Yes
- Fan Controller Power Via: SATA Connector
- LED Controller: Yes - LED Button
- Supported Qty of Fans (Max.): Daisy Chain
- Supported Qty of LEDs (Max.): Daisy Chain
- Fan Information:
- Fans Powered Via: 4 Pin Proprietary
- LEDs Powered Via: 4 Pin Proprietary
- PSU Max. Length (mm): 195mm
- Packaging Type: EPE Foam
- Packaging Thickness: 23.77mm
Case Specifications- Form Factor: Micro ATX
- Motherboard Support: Micro ATX, Mini ITX
- PSU Support: Standard ATX
- PSU Location: Bottom
- Gaming Case: Yes
- Water Cooling: Water Cooling Ready!
- Supported Radiator Size: 240mm
- Supported Radiator Positions: Front, Top
- Body Material: 0.5mmSPCC
- Front Bezel Material: ABS & Mesh
- Side Panel: Tempered Glass
- Internal Cable Management Depth: 20mm
- External Bays:
- Internal Bays: 2 x 3.5” Internal
- 3 x 2.5” Internal
- Drive Bay Notes: 1 x 2.5" shared with 1 x 3.5"
- Expansion Slots: 4 x Full Size
- Cooling Front: Space For 3 x 120mm or 3 x 140mmFans (3 x 120mm ARGB Fans Included)
- Cooling Top: Space For 2 x 120mm Fans
- Cooling Rear: Space For 1 x 120mm Fan (1 x120mm ARGB Fan Included)
- Cooling Side: None
- Cooling Bottom: None
- IO Ports: 1 x USB 3.0
- 2 x USB 2.0
- 1 x HD Audio
- 1 x Microphone
- GPU Max Length: 325mm
- CPU Cooler Maximum Height: 165mm
- Front Bezel Colour: Black
- Body Colour: Black
- System Cabinet Features:
- PSU Included: No
