Introducing the CiT Falcon, unique design and exceptionalfunctionality, these are the characteristics that CiT have chosen todefine the Falcon. The Falcon has a striking front panel with stylisheye-catching angles results in an aesthetically appealing chassis andthe combined mesh & slanted line cut out combo front panel delivershigh airflow and dust filtration offering a stylish and functionalsolution for your build.
This stylish gaming case does not stop there with eye-catching angularaesthetics complete with cut-outs help the Falcon to reach its fullpotential. Six pre-installed 120mm ARGB fans mounted on the front, topand rear of the chassis illuminates the spacious interior of thisexquisite Mid-Tower. Benefit from a range of fans and radiator supportto take your Falcon to the next level, the six pre-installed fansstraight out of the box the Falcon is fully populated, two watercooling locations with a 360mm radiator the largest that can beinstalled at the front this case is full of cooling capability.
Your hardware is on show thanks to the tempered glass side panel itleaves little hidden, moving onto the top of the case the I/O panelprovides USB3.0 and USB2.0 connections & inside are inner-ring fanswith access to approximately 30 modes or 16.8 million colours using acompatible addressable RGB MB.
Measuring 45.1cm in height, the all-black interior & full PSUshroud add to the smooth and unobtrusive look. It can fit a graphicscard up to 31cm & behind the MB & PSU shroud up to 3 x 2.5 / 3x 3.5 drives. Top & bottom removable dust filters help keep yourrig clean, with room in the shroud for an ATX PSU up to 165mm withcables easily hidden from view.
Overall the CiT Falcon delivers style and performance in one versatilechassis.
Key FeaturesCutting Edge Aesthetics - Game in style with a sleek exterior designmade with sharp edged aesthetics complete with three cut outs made froma combination of mesh and angled cut outs, accompanied by ARGBillumination it is a real statement. The front panel looks razor sharpand has the edge with a high airflow front panel design maximisescooling performance.
Stylish Cooling - Monster cooling is on offer thanks to the sixinner-ring ARGB fans pre-installed, its ready to cool a powerful buildstraight away, mounted on the front, top and rear of the Falcon. Thecooling fans can be controlled via connection to your Motherboards3-Pin 5VDG or via the I/O Panel.
Motherboard Software - The ARGB lighting effects can be synced throughthe Motherboard which supports ARGB function, 5V 3-Pin Addressable RGBheader, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0& ASRock. Customise the look with endless possibilities with 16.7million static modes and 12 pre-set lighting effects.
Tempered Glass Panel - The tempered glass side panel designed with ahinged door design offers an unobstructed view of the interior andshows off your system build. It allows users to enjoy a panoramic viewof the lightning.
Hardware Orientated - The interior comes entirely in black and with afull-length PSU shroud that only adds to the stylish and unobstructivelook. A dedicated PSU Shroud that is made with solid steel panellingthat perfectly covers the cables, showcases the PSU specs and containsa hard drive mount. Behind the shroud is where users will find spacefor a pair of 3.5 HDDs or 1 x 2.5 SSD & 1 x 3.5 HDD in the cageprovided, 1 x 3.5 HDD can be installed on the PSU shroud and 2.5 SSDscan be installed next to the Motherboard. The Motherboard tray and PSUshroud both offer a number of openings for optimum cable managementwith up to 18mm cable management space. Underneath the case is aremovable dust filter suitable for a full sized ATX PSU up to 165mmlong.
ATX Housing - Standing at 451mm high, 200mm wide and 361mm deep theFalcon is compatible with a wide range of components, with 320mm ofclearance for GPUs and it can facilitate CPU coolers up to 165mm tall.Additionally the I/O panel located at the front possesses one USB3.0& two USB2.0 ports, HD-Audio, Mic & LED / Reset button. Thereare seven expansion slots on the rear panel for PCIe devices.
Dust Filter - Two removable dust filters help keeps the dust out ofyour gaming PC and enhances the cooling performance even further, theyare easy to remove which makes them easy to clean.
SpecificationsChassis Dimensions (Excluding Fascia / Panels): (W) 200 x (H) 440 x (D)330mm
Water Cooling Support:
Front Supported Radiator(s): 120mm, 240mm, 280mm and 360mm
Rear Supported Radiator(s): 120mm
6 x ARGB Fans Included:
Front Fan Powered Via: Slave Fan - 4pin Proprietary
Front Fan LEDs Powered Via: Slave Fan - 4pin Proprietary
Top Fan Powered Via: Slave Fan - 4pin Proprietary
Top Fan LEDs Powered Via: Slave Fan - 4pin Proprietary
Rear Fan Powered Via: Master Fan - SATA
Rear Fan LEDs Powered Via: Master Fan - SATA
Fan Control Via: LED Button (Reset Switch) or MB Sync
General Specifications:
Max. Motherboard Size : (W) 305 x (D) 244mm
PSU Max. Length (mm): 165mm
Dust Filters: 2 x Top & Bottom
Packaging Type: EPE Foam
Packaging Thickness: 22.37mm
Case SpecificationsForm Factor: Midi Tower
Motherboard Support: ATX, Micro ATX, Mini ITX
PSU Support: Standard ATX
PSU Location: Bottom
Gaming Case: Yes
Water Cooling: Water Cooling Ready!
Supported Radiator Size: 280mm
Supported Radiator Positions: Front
Body Material: 0.5mmSPCC
Front Bezel Material: ABS & Mesh
Side Panel: Tempered Glass
Internal Cable Management Depth: 18mm
External Bays:
Internal Bays: 3 x 3.5 Internal
3 x 2.5 Internal
Drive Bay Notes: 1 x 2.5" shares 1 x 3.5"
Expansion Slots: 7 x Full Size
Cooling Front: Space For 3 x 120mm or 2 x 140mm Fans (3 x 120mm ARGBFans Included)
Cooling Top: Space For 2 x 120mm Fans (2 x 120mm ARGB Fans Included)
Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm ARGB Fan Included)
Cooling Side: None
Cooling Bottom: None
Fan Controllers: 0 Fan Controllers, controlling up to
0 fans in total
IO Ports: 1 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
GPU Max Length: 320mm
CPU Cooler Maximum Height: 160mm
Front Bezel Colour: Black
Body Colour: Black
System Cabinet Features:
PSU Included: No
