Compact Multi-Compatible CPU Cooler for Continuous Operation
- Compatible with Intel® & AMD® sockets
- Pre-applied MX-2 thermal paste
- Extra long life span thanks to dual ball bearing and low motor temperature
- Lower power consumption and less vibration with new motor technology
- Offset heat pipes ensure optimal heat dissipation
The ARCTIC Freezer 7 X CO is a compact CPU cooler with one 92 mm fan. It is multi-compatible with common Intel® and AMD® sockets. Due to its dual ball bearing it is optimised for Continuous Operation. The Freezer 7 X CO benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC was able to significantly improve the Freezer 7 X CO cooling performance.
Compatible with Intel & AMD Sockets
The Freezer 7 X CO is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.
Pre-applied MX-2 Thermal Paste
Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.
Longer Lifespan thanks to its Low Motor Temperature
The Freezer 7 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X CO.
Offset Heat Pipes enable Optimal Heat Dissipation
The direct touch heat pipes attached to the Freezer 7 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.
10 % More Cooling Capacity with Freezer 7 X CO
The ARCTIC Freezer 7 X CO sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.
More Efficienct and Whisper Quiet
In addition to operating more quietly, even at maximum speed, the Freezer 7 X CO built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X CO to run at a whisper-quiet 0.3 sone when at maximum speed.
P-fan for Increased Performance
Inspired by the P-series, the Freezer 7 X CO fan benefits from all of the advantages of P-fans:
• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibration
• PWM for synchronous fan contro
Double Ball Bearing Constructed for Continuous Operation
The premium quality dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.
Offset Heat Pipes enable Optimal Heat Dissipation
The Freezer 7 X CO uses direct-touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.
